EXTRUSION FÚN MOLDING ẸRỌ 1L-30L
ITOJU Imọ-ẹrọ
| Ẹka | Nkan | Ẹyọ | 1L | 2L | 3L | 5L | 12L | 20L | 30L |
| Ipilẹ Specification | Ogidi nkan | - | PE/PP/PA/PVC ati be be lo | PE/PP/PA/PVC ati be be lo | |||||
| Iwọn | m | 2.7x1.6x1.9 | 3.1x2.0x2.0 | 3.2x2.0x2.0 | 3.5x2.1x2.1 / 3.7x3.0x2.1 | 4.3x3.5x2.2/4.6x4.4x2.2 | 5x5.9x2.35/5x6.5x2.4 | 53x6.4x2.4 | |
| Apapọ iwuwo | T | 2.3Z4.2 | 3.2Z6.5 | 3.4Z6.8 | 4.878.5 | 12/13 | 17/18.5 | 20 | |
| Extrusion System | dabaru motor | KW | 7.575.5 | 15/7.5 | 18.5/15 | 22/18.5 | 30 (37)/22 | 55/37 | 75/55 |
| Opin ti dabaru | mm | 55/45 | 65/55 | 70/65 | 80/70 | 90/80 | 100/90 | 110/100 | |
| Skru L / D ratio | L/D | 23:1/23:1 | 25:1/23:1 | 23:1/25:1 | 23:1/23:1 | 25:1 (28:1)/23:1 | 28:1/28:1 | 28:1/28:1 | |
| Extruder alapapo agbara | KW | 7 | 15 | 18 | 20 | 23 | 28 | 30 | |
| Nọmba awọn agbegbe alapapo | awọn kọnputa | 3 | 3 | 3 | 4 | 5 | 7 | 8 | |
| Plasticizing agbara | kg/h | 55 | 70 | 75 | 95 | 120/130 | 160 | 180 | |
| Ku Ori | Awọn agbegbe alapapo | awọn kọnputa | 3-5 | 3-7 | 3-7 | 3-9 | 3-12 | 3-11 | 3-5 |
| Agbara alapapo | KW | 1.5-3 | 2-4.5 | 2.5-5 | 3-6 | 5-9.5 | 8-14 | 10-12 | |
| Nọmba ti cavities | - | 1-4 | 1-6 | 1-6 | 1-7 | 1-10 | 1-5 | 1-2 | |
| Clamping System | Ijinna sisun | mm | 300 | 360/400 | 360/400/450 | 450/550 | 600/650/700/800/850 | 700/800/850 | 800/900 |
| Ijinna dimole | mm | 150 | 200 | 200 | 250/200 | 350/250/200 | 350/250 | 400/350 | |
| Ṣii ọpọlọ | mm | 160-310 | 160-360 | 180-380 / 160-360 | 230-480 / 180-380 / 160-360 | 330-680 / 250-500 / 240-440 | 380-730 / 330-680 / 300-550 | 420-820 / 380-730 | |
| Agbara dimole | kn | 50 | 80 | 90 | 100 | 125/180 | 180 | 200 | |
| Ilo agbara | Lapapọ agbara | KW | 14-16/23-25 | 24-26 / 42-45 | 37-41 / 48-52 | 44^16/59-63 | 72-78 | 80-110 | 136-140 |
| Afẹfẹ titẹ | MPa | 0.6 | 0.6 | 0.6 | 0.6 | 0.6 | 0.6 | 0.6 | |
| Lilo afẹfẹ | m3/ min | 0.6 / 0.4 | 0.8/0.4 | 0.8/0.6 | 1 /0.8 | 0.8 | 1 | 1.1 | |
| Lilo omi | m3/ h | 0.6/1 | 1/1.2 | 1/1.2 | 1.2 / 1.5 | 1.5 | 2 | 2.2 | |
ITOJU Imọ-ẹrọ
1.The nọmba ti kú ori ati clamping ọpọlọ akojọ si ni awọn loke ti wa ni ṣeto fun boṣewa si dede.Agbara awọn ọja ni awọn titobi oriṣiriṣi ti a ṣe lori ẹrọ kan ko gbọdọ jẹ diẹ sii ju afikun tabi iyokuro 20% ti ọkan ti a ṣeduro.
2.One ẹrọ, ti a lo fun ṣiṣe awọn ọja pẹlu titobi ni orisirisi ati agbara ni iyatọ nla, le ṣe apẹrẹ pẹlu awọn ori ku ni nọmba odd.Apẹrẹ yii jẹ ki o ṣee ṣe lati sin ẹrọ kan ni ọna pupọ nipasẹ tiipa ọkan tabi diẹ sii ori ku.Mu ẹrọ "TVHD-1L-3" gẹgẹbi apẹẹrẹ, awọn ori iku mẹta fun igo 180ml ati awọn ori iku meji fun igo 500ml.
3.The loke si dede le gbogbo wa ni igbegasoke sinuaIru arabara ", apakan gbigbe gbigbe ti eyiti o jẹ apẹrẹ pẹlu servo motor lati ṣaṣeyọri ariwo, iṣẹ irọrun, ipo deede ati idojukọ aarin-iyara lori apẹrẹ.
4.Above data jẹ fun itọkasi nikan.Tonva ni idaduro ẹtọ lati yipada ọna ẹrọ.Ohun elo rira jẹ koko ọrọ si olubasọrọ.
2.One ẹrọ, ti a lo fun ṣiṣe awọn ọja pẹlu titobi ni orisirisi ati agbara ni iyatọ nla, le ṣe apẹrẹ pẹlu awọn ori ku ni nọmba odd.Apẹrẹ yii jẹ ki o ṣee ṣe lati sin ẹrọ kan ni ọna pupọ nipasẹ tiipa ọkan tabi diẹ sii ori ku.Mu ẹrọ "TVHD-1L-3" gẹgẹbi apẹẹrẹ, awọn ori iku mẹta fun igo 180ml ati awọn ori iku meji fun igo 500ml.
3.The loke si dede le gbogbo wa ni igbegasoke sinuaIru arabara ", apakan gbigbe gbigbe ti eyiti o jẹ apẹrẹ pẹlu servo motor lati ṣaṣeyọri ariwo, iṣẹ irọrun, ipo deede ati idojukọ aarin-iyara lori apẹrẹ.
4.Above data jẹ fun itọkasi nikan.Tonva ni idaduro ẹtọ lati yipada ọna ẹrọ.Ohun elo rira jẹ koko ọrọ si olubasọrọ.
Factory onifioroweoro
Iṣẹ wa
Fesi ibeere naa ki o ṣe igbese ni awọn wakati 24.
Fifun mimu ati mimu abẹrẹ ti a ṣe ni ile-iṣẹ atilẹba ti TONVA.
100% Ayẹwo didara ṣaaju gbigbe.
Ẹrọ oluranlọwọ fun laini pipe.
Pese iṣẹ ikẹkọ ni ile-iṣẹ TONVA tabi ile-iṣẹ cnett.
Apẹrẹ adani wa bi awọn ibeere.
Engineer fun okeokun fifi sori wa
Pese ijumọsọrọ iṣẹ ni ìbéèrè.
Yara Ayẹwo
Awọn onibara
Network Marketing Service
Ẹrọ wa ti n ṣe iranṣẹ fun awọn alabara ni gbogbo agbaye.
Kọ ifiranṣẹ rẹ nibi ki o si fi si wa
